Specs:
-
304 stainless steel.
-
Tumbled, deburred and polished.
-
Requires no tuning or modification before installation.
-
​Unique in the market. Reduces wear on the plastic TX22 striker housing and limited to a minimal rounding of the plastic housing area in front of the striker block.
-
Lasts for the life of the TX22.
This forced reset disconnector does not convert a TX22 into a machine gun. Pulling the trigger too hard will create upward pressure on the disconnector and will stop the slide. Extended hard trigger use will cause excessive wear to the TX22 striker housing. To avoid wear please,
​
USE LIGHT TRIGGER PRESSURE.
Using the FRD with a suppressor:
Some people report using suppressors on a TX22 with a FRD functions but most do not. Suppressors increase back pressure and ROF and may not function unless:
-
The suppressor is very light, aluminum/titanium suppressors under 4 oz.
-
Weight is added to the slide.
-
A Rate Reducer is used.
DO NOT USE the v7 FRD in combination with metal steel or metal plastic hybrid striker housings. Damage to the FRD will result. We do not warranty or replace the v7 against metal striker housing damage.
Ammo:
The TX22 prefers high velocity ammo with a FRD. We use CCI Mini Mag 40Gr Round Nose ammo for reliability but most high velocity 1200+ fps round nose ammo is recommended. Barrels 4.6" or shorter will keep HV ammo subsonic but the extra power helps with reliability. Use of hyper sonic 22LR ammo will increase wear of the TX22.
Tools:
A 1/16” punch with a 1" or longer rod is required for installation.
Installation videos:
https://www.youtube.com/watch?v=wdPvdNAb-7s
https://odysee.com/TX22-FRT-Installation:b
​